Description

The Dynasonic PDR-1 Stereo Digital Recorder comes to you complete with 4 microphones: 2 internal and 2 lapel mics with sensitivity adjustment, a set of earbuds, and a USB cable. The PDR-1 recorder is housed in a sturdy chassis. Use it to record regular audio at CD-quality 16-bit 44kHz, and MP3s at 128Kbps. At 1kHz, the signal-to-noise ratio is a surprising 55dB and frequency response is 20 to 20kHz.

The PDR-1 recorder has two 1/4" inch mono jacks, one 1/8" stereo line out jack, two 1/4" line-in/guitar mono jacks with volume controls, a USB port, a 1" x 2" LCD display, and hold button. The PDR-1 comes factory stocked with 128 MB of Flash memory, expandable up to 4 gigs for a total of almost 7 hours maximum recording time in stereo at full bandwidth. The Dynasonic PDR-1 also has built-in monitor speakers and includes a power adaptor.

Dynasonics PDR-1 Stereo Digital Recorder Specifications:

• Highest sample rate: 128Kbps for MP3s, 44kHz, 16-bit for WAVs
• S/N ratio at 1 KHz: 55dB
• Frequency response: 20 to 20kHz
• Internal mic: two of L & R
• External Mic: two for 1/4" mono jacks
• Earphone (1/8" stereo): one
• Line out: 1 of 1/8" stereo jack
• Line in: 2 of 1/4" mono jacks
• Guitar in: 2 of 1/4" mono jacks
• Built in Flash memory: 128MB
• Max. SD card memory capacity: 4G
• Monitor speaker: yes
• Size: 33"W x 11"H x 61"D

Dynasonics PDR-1 Stereo Digital Recorder Features:

• Support high-quality 44 kHz WAV and MP3 recording formats
• Stereo built-in condenser microphones
• Stereo audio inputs, switch to microphone, guitar, and line-in recording sources
• Volume control for input and output level adjustment
• Stereo earphone jack
• Built-in flash memory
• Equipped with an expended memory socket of SD card
• USB port for computer connection and DC power in
• Equipped with a monitor speaker
• Works with two AA batteries or DC 5V

Save BIG when you buy today!